Safemate Biological Safety Cabinets | Equipment for Contamination Control

Information Sheet

tn_210w_safemate-series-class-ii

Laboratory Services

hpv-decontamination
HPV Decontamination

Hydrogen Peroxide Vapour Decontamination is ideal for biological safety cabinets, CO2 incubators, pass through hatches, isolators, robotics as well as a wide range of of other laboratory and related equipment.

> Learn More...

Mechanical Testing

Professional, on-site testing and certification service including, but not limited to the following:

• Cleanrooms
• Biological Safety Cabinets
• Laminar Flow Equipment
• Chemical Fume Hoods
• Surgical Suites
• Isolation Rooms
• Pharmaceutical Isolators
• Cytotoxic Cabinets
• General HEPA filtered Air-handling Systems.

> Learn More...

SAFEMATE Series Class II

| Print |

E-mail

Biological Safety Cabinets

Bio Cabinets supply the Safemate Series Class II Biological Safety Cabinets and other related laboratory equipment products throughout Australia.

The Safemate range of Biological Safety Cabinets Class II provide an extremely reliable level of safety for the operator, the environment and the product.

Safemate Biological Safety Cabinets are supplied in four different sizes (0.9mt, 1.2mt, 1.5mt and 1.8mt) Compliant with stringent standards AS2252.2 and EN12469 this latest generation Class II BSC offers non surpassed quality, design and ergonomics. The internal design, the airflow aerodynamics and microprocessor status monitoring, the built-in safety devices and the high quality manufacturing, guarantee the highest performances at the most stringent safety levels, as specified by Australian and International standards.

SAFEMATE Series Main Specifications

Motorised Electrical air-tight sliding sash, operated by soft touch panel
Microprocessor controlled motor blower, with volumetric sensor for exhausted airflow monitoring
Specifically designed microprocessor software and environmental friendly components ensures low energy consumption for a high efficiency and reduced heat output
“Silence Within” design: integrated methodology and technology for improved control of surface transmitted noise, reduction of noise at the source, elimination of noise propagation, and noise emission that guarantees the quietest environment conditions in your laboratory
State of the art Microprocessor control system offering:
- High-resolution large digital display
- On line automatic control of airflow volumes
- Sliding sash window with smart control
- Permanent monitoring of HEPA filters life span
- Alarms. Multilevel alarms, with redundancy functions
- Permanent display of working conditions
- Highest airflow stability both in case of transitional disturbances and of progressive filter clogging
- Semi-automatic fumigation cycle (EN12297 tested and certified)
- Continuous monitoring of front barrier airflow for the highest operator safety
- Low barrier alarm
- Power failure alarm
Volt free contact for monitoring of optional remote exhaust fan
Remote control box for the control of devices that need to be synchronized with cabinet status (on/off)
Automatic reset of initial conditions in case of power failure

SAFEMATE Series Mechanical and Functional Specifications:

Sloped front design for the highest operational comfort. Sloped back side of the working chamber for the best down flow distribution (cabinet carcass EN12298 tested and certified for air tightness)
Utilities inlets from the top of the cabinet
Stainless Steel AISI 304 internal surfaces with 2B finishing (including spillage tray). Solid work surface and special designed front grill
Electrically operated sliding 6 mm multilayer safety glass front window 254nm UV light
Rear work zone mounted with forward set timer function
Comfortable 200 mm front opening at operational conditions
Hinged front glass for easy cleaning procedures
Easy to install retrofit options through side panels
HEPA H14 class High Efficiency Particulate Air filters with 99.999% efficiency on 0.3 micron particles (most penetrating particle diameter) (EN1822-1 and EN 13091:1999 tested and certified)
Filter change and maintenance from the front of the cabinet
Exhaust transitions easily installable
Key operated. The key can be removed when the unit is in SAFE mode, in order to avoid unwanted operation. In case of power failure, the cabinet is reset to original working conditions
Self calibration cycle performed when cabinet is switched on
Visual display of SAFE conditions. Pre-warning before actual alarm conditions are reached (visual and acoustic alarms)
Soft touch control panel for standard service utilities. Interconnected UV and fluorescent lights
Exhaust and recirculating flow rates ensure 25 air changes/min in the working area (30% 70% split)
Front barrier air speed ≥ 0.5mt/sec
Aperture protection Factor (Apf) ≥ 1.5 x 105 (retention efficiency)
Clean ability Index C grade.(EN 12296 tested and certified)
Light intensity on work surface ≥ 1200 lux
Noise level ≤ 55 dB(A) (ISO 11201, ISO 4871 and ISO EN 3744 tested and certified)
Work surface displacement (vibration) <0.005mm RMS between 20Hz and 20,000Hz (ISO 5349 tested and certified)
240V, 50Hz
Max power (for each power point) 3Amps
Microprocessor equipped with analogical watch dog
CE certification according to Machinery Directive 89/392/EEC, 91/368/EEC, 93/44/EEC 93/68/EEC.

SAFEMATE Series Class II Biological Safety Cabinet Image Gallery:

> Quote Request < for the Bio-Cabinets SAFEMATE Series Class II Biological Safety Cabinet.

SAFEMATE Series Class II Biological Safety Cabinet Applications:

Hospitals (pharmacies, laboratories, surgical suites, general air handling systems)
Hematology, oncology and pathology clinics
Pharmaceutical, electronics, chemical, medical, stem cell, IVF and food manufacturing
Universities, animal and research facilities.

SAFEMATE Series Class II Biological Safety Cabinet Technical Specifications:


Biological Safety Cabinet	Safemate 0.9	Safemate 1.2	Safemate 1.5	Safemate 1.8
Work chamber (wxdxh) mm	924 x 600 x 700	1230 x 600 x 700	1530 x 600 x 700	1840 x 600 x 700
Overall dimensions (wxdxh) mm	1074 x 840 x 1450	1380 x 840 x 1450	1685 x 840 x 1450	1990 x 840 x 1450
Front Opening mm	200	200	200	200
Weight (kg)	150	190	230	300
Power Supply Single Phase V	220/240V-50Hz	220/240V-50Hz	220/240V-50Hz	220/240V-50Hz
Power Watts	400	400	500	800

Last Updated on Monday, 23 March 2009 00:29

-Contamination control, fume extraction and animal facility lab suppliers.		www.laftech.com.au

BIO Cabinets Australia Pty Ltd & LAF Technologies Pty Ltd P.O Box 2440, North Ringwood, Victoria, Australia, 3134 Telephone: 1300 306 002 Fax: +61 03 9879 4700 Contact US	NATA accredited laboratory providing decontamination, testing & certification lab services for air filtration and contamination control lab equipment in Australia.